Plywood supply · Johor Bahru & Johor
JIYU supplies ENF-grade multi-layer plywood to furniture factories, cabinet makers and renovation firms across Johor, shipped from our warehouse in Puchong, Selangor. We do not have a Johor branch or local stockholding, so the practical question for a Johor buyer is not how fast we can drop by — it is how you structure order size and freight so the per-sheet cost makes sense at this distance. Specifications, the third-party test report and minimum order are below.
Distance is a commercial question, not a service one
Puchong to Johor Bahru is roughly a four-hour drive. That does not change what the board is — it changes how a Johor buyer should size an order.
The same lorry run costs roughly the same whether it is half loaded or full. At this distance that difference is felt per sheet, which is why Johor buyers tend to consolidate into fuller loads instead of ordering little and often.
With no local stockholding to draw on, the buffer has to sit in your workshop, not ours. Buyers running production here usually keep a float of the thickness they cut most.
We release the order within 3 days. The transport company is yours to appoint, which also means the arrival date is theirs to commit to — we will not promise it on their behalf.
Specification
Every figure below comes from the third-party test report or the product specification — nothing here is a marketing rounding.
| Item | Detail |
|---|---|
| Ships from | Perdana Industrial Park, Puchong, Selangor |
| Sheet size | 2440 mm × 1220 mm |
| Thickness in stock | 18 mm and 6 mm |
| Construction | 9-ply or 11-ply cross-laminated |
| Adhesive | Soybean-based glue, not urea-formaldehyde resin |
| Formaldehyde grade | ENF — ≤ 0.025 mg/m³ (GB/T 39600-2021); tested 0.022 mg/m³ |
| Minimum order | 1 pallet (50 sheets) |
| Dispatch | Within 3 days of confirmed order |
| Warranty | 10 years on the board; 3 years termite |
Why a Johor factory would switch supplier
For a production line, the expensive problem is not a slightly higher sheet price — it is a batch that behaves differently from the last one.
One product line, one standard. What arrives this month is the same construction and the same thickness as last month, so your CNC settings and edge-banding do not need re-tuning per batch.
If your buyer asks what the formaldehyde emission is, you have a report number and a lab name to give them — not an adjective. That is often the difference in a tender.
Questions we get asked
No. Our warehouse is at Perdana Industrial Park, Puchong, Selangor, and everything ships from there. There is no JB branch, no JB stockholding and no local team — worth knowing before you plan a job around same-day collection.
We dispatch within 3 days of a confirmed order. Transit time after that depends on the logistics company you appoint, so we do not quote an arrival date on your behalf — we control the dispatch, not the road.
One pallet — 50 sheets. For a delivery point this far from Puchong, freight per sheet drops sharply as you consolidate, so buyers in Johor usually order in fuller loads and hold stock rather than reorder in small lots.
Yes — repeat, spec-consistent volume is what the board is set up for. The same thickness and the same flat sheet every month matters more to a production line than any single delivery, and that consistency is the reason to hold one supplier rather than rotate.
ENF grade — the strictest class under GB/T 39600-2021, capped at 0.025 mg/m³. Our board tested at 0.022 mg/m³ under report JC26-WT0087, issued by the CMA-accredited Liuzhou Quality Inspection and Testing Research Center. Ask on WhatsApp and we will send the report so you can pass it to your own buyer.
Thickness, quantity and where in Johor it has to land. We come back with the specification sheet, the ENF test report, and what a first pallet looks like.
Related